Products Lineup

Suction Filter

SFA series

Suction strainer with the Rc(PT)screw
Suction Strainer installed directly into hydraulic reservoir.

SFB series

Suction strainer with a guide holder for easy removal installed onto the suction flange port of hydraulic reservoirs.

SFC series

Suction strainer with a four bolt flange pattern installed directly to the wall of the hydraulic reservoir.

MT series

Strainer with a built-in magnet used to remove heavy metallic contamination from fluid.

Line Filter

DT series

7MPa (1,015 PSI) line filter suitable for the pilot circuit of various hydraulic equipment.

HT series

10.5MPa (1,523 PSI) line filter suitable for the pilot / delivery circuit of various hydraulic equipment.

GT series

14MPa (2,030 PSI) line filter suitable for the pilot / delivery circuit of various hydraulic equipment.

FT series

21MPa (3,045 PSI) line filter
Suitable for the pilot / delivery circuit of various hydraulic equipment.

UT series

35MPa (5,075 PSI) line filter suitable for the pilot / delivery circuit of various hydraulic equipment.

US series

35MPa (5,075 PSI) line filter suitable for the pilot / delivery circuit of various hydraulic equipment.

CL series

3.5MPa (508 PSI) line filter element can be replaced from upper part of filter case.

R series

1.5MPa (218 PSI) line filter suitable for low-pressure circuit / return circuit of various hydraulic equipment.

SS series

21MPa (3,045 PSI) line filter for high pressure, small flow rate circuits suitable especially for last chance filtration (catastrophic failure prevention).

Pilot Filter

DT series

7MPa (1,015 PSI) line filter suitable for the pilot circuit of various hydraulic equipment.

Last Chance Filter

SS series

21MPa (3,045 PSI) line filter for high pressure, small flow rate circuits suitable especially for last chance filtration (catastrophic failure prevention).

Return Filter

SP series

Easy to replace line filter for low pressure applications which are replaced by spinning the canister off of the filter base (head).

RA series

Return filter which is installed directly into the hydraulic reservoir.

RC series

Return Filter
Return filter which is installed directly onto the inner wall surface of hydraulic reservoir.

RT series

1.5MPa (218 PSI) line filter suitable for low-pressure circuit / return circuit of various hydraulic equipment.

Spin Filter

SP series

Easy to replace line filter for low pressure applications which are replaced by spinning the canister off of the filter base (head).

Drain Filter

SP series

Easy to replace line filter for low pressure applications which are replaced by spinning the canister off of the filter base (head).

Air Breather

AB series

Air breather used to manage pressure within hydraulic reservoir and filter air coming into and leaving a hydraulic reservoir.

Nylon Strainer

FS series

Nylon strainer used as a filling strainer for fuel, hydraulic oil, bio oil, and all other fluid used in agricultural , construction, and industrial machinery.

Accessory Valve

LV series

Valve
Valves used in hydraulic, drive-train circuits as pressure relief, cooler relief applications.

Element Cartridge

ELEMENT & CARTRIDGE

Replaceable elements and cartridges used in various construction, agricultural and industrial applications.