Summary of the Pressure Drop vs. Flow Rate Test
"To Serve Society's Filtration Needs"
This is our Company Policy.
Please click here for a summary of the filter rating (efficiency) test
|
To measure the flow rate vs. pressure drop, we use test equipment based on the below circuit drawing. Water or another fluid adjusted for the customer’s viscosity passes through the filter. By measuring the pressure before an after the test filter, one can calculate the filter’s pressure itself. |
|
|
|
|
|
|
|
| Measure the amount of pressure upstream (IN) and downstream (OUT), and calculate the pressure differential through the below formula. | |
|
|
|
| *It is necessary to subtract in advance the pressure differential caused by the filter housing. | |
|
As for the pressure differential during filtration, it is desirable to have low resistance through the piping. We offer special media to give you low pressure drop vs. flow rate characteristics. |
|
|
|
|
|
|
|
|
Please click here for a summary of the filter rating (efficiency) test |
|
|
|
|
