Air flow within a factory is determined by air pressure. The filtered air that enters clean zones is the cleanest and has the highest pressure. That air then flows into the semi-clean zones, which have the next highest pressure. Finally, it flows into the areas with the lowest air pressure, the contaminated zones. However, external contaminants can also be prevented from entering a contaminated zone by maintaining a higher air pressure there than that of the outside.
Air Handling Unit
An Air Handling Unit (AHU) consists of air blowers (fans), heat exchangers (coils), humidifiers, air filters and a casing. AHUs are primarily used in large air-conditioning systems.
Types of available air filters
This long-lasting, pleated filter removes particles with a diameter of more than 5 μm.
This filter has a medium collection efficiency for particles with a diameter less than 5 μm.
Capable of dealing with a variety of gaseous substances within the air, this product offers superior purification performance.
Exhaust Treatment Unit (Industrial Kitchen)
This device uses an air filter to remove bad odors emitted from the kitchen machinery in food factories, then vents the air into the atmosphere.
Types of available air filters
Capable of dealing with a variety of gaseous substances within the air, this product offers superior purification performance.
Air Shower
This device uses high-speed purified air to remove dust and other particles adhered to the surfaces of people and objects before they enter the clean room. This prevents contaminants from entering the controlled clean space.
Types of available air filters
Air Curtain
This device uses the flow of air to prevent insects, dust, and other foreign material from entering a space in cases where sanitary conditions must be maintained but the opening cannot be fully closed due to the entry and exit of people and the transportation of goods.
Types of available air filters
Packaged Air Conditioner (Ceiling)
A heat-pump unit consisting of one outdoor units, multiple indoor units, and refrigerant piping. The indoor unit is embedded in the ceiling, eliminating the need for ductwork and enabling individual control. Used in small and medium buildings and stores.
Types of available air filters
This long-lasting, pleated filter removes particles with a diameter of more than 5 μm.
This filter has a medium collection efficiency for particles with a diameter less than 5 μm.
Packaged Air Conditioner (Floor)
This heat pump consists of one outdoor unit, multiple indoor units, and refrigerant piping. The indoor unit is a floorstanding type, requiring no ductwork and allowing for individual control. These systems are used in factories and similar locations.
Types of available air filters
This long-lasting, pleated filter removes particles with a diameter of more than 5 μm.
This filter has a medium collection efficiency for particles with a diameter less than 5 μm.
Capable of dealing with a variety of gaseous substances within the air, this product offers superior purification performance.
Positive-Pressure Ventilation Fan
While a typical ventilation fan can experience reduced air flow due to effects from the external environment, positive-pressure ventilation fans use static pressure to avoid these effects and maintain constant air circulation. They are primarily used to ventilate large volumes of air in places like restaurants and factories.
Types of available air filters
Air-Conditioning Duct
AC ducts are channels that move air to and from an air conditioner.
Types of available air filters
External Air Intake
The intakes are equipped with air filters to ensure that clean air is inducted to the rooms from the ductwork.
Types of available air filters
Clicking on a product image above will direct you to the corresponding product page on the AQC website (Japanese).